|
The MP850 Label Finishing System
Contact Us • MP850 Software Updates
The MP850 is an in-line or off-line stand alone label finishing system, that can laminate
and rotary die cut pre-printed labels produced by any roll to roll label printer. The MP850
reduces inventory and inventory cost. There is no need to inventory die cut blanks or
preprinted labels. You can print and die cut what you want, when you want. The MP850
laminates and die cuts labels up to 8.25" x 9" at speeds up to 8 IPS (inches per second). It
uses an all electronic set up with an interactive touch screen display – no tools required.
Download the MP850 Brochure
Specifications
| Dimensions |
| Width: |
24" (609.6 mm) |
| Height: |
38" (965.2 mm) |
| Length: |
60" (1524 mm) |
| Weight: |
450 lbs. (Does not include packing materials) |
| Compatible Printers |
Any roll to roll label printer. Including
TTR printers, VIP, Primera, Degrava, HP, QuickLabel Systems printers and other printing systems |
| Electrical Power |
100-240VAC @47-63 HZ |
| Laminating speed |
Up to 8 ips |
| |
|
| Label Dimensions |
| Min. cut length: |
Die Dependent |
| Max. cut length: |
9" (228.6 mm) |
| Min. web width: |
1.0" (25.4 mm) |
| Max. web width: |
9" (228.6 mm) |
| Liner rewind core size: |
3.0" (76.2 mm) |
| Label rewind core size: |
3.0" (76.2 mm) |
| Label rewind maximum O.D. |
10" (254 mm) O.D. |
| Maximum unwind roll diameter: |
10" (254 mm) O.D. |
| Maximum laminate roll diameter |
10" (254 mm) O.D. |
| |
|
| Environment |
| Operating Temperature |
40° - 104° F (4° - 40° C) |
| Storage Temperature |
32° - 120° F (0° - 49° C) |
| Relative Humidity |
10-90% (Non-Condensing) |
| |
|
Specifications subject to change without notice.
Click on the logos below to go to that vendor's site |
|
